Volume 3, Issue 1 (Oct 2006) IJMSE 2006, 3(1): 9-15 | Back to browse issues page

BARADARI H., AMANI HAMEDANI H., KARIMI KHOYGANI S., REZAEI H.R., JAVADPOUR J., SAR POULAKI H.. THE EFFECT OF RAW MATERIALS CONCENTRATION ON HYDROXYAPATITE POWDER CHARACTERISTICS AND SINTERING BEHAVLOR. IJMSE 2006; 3 (1) :9-15
URL: http://ijmse.iust.ac.ir/article-1-78-en.html

THE EFFECT OF RAW MATERIALS CONCENTRATION ON HYDROXYAPATITE POWDER CHARACTERISTICS AND SINTERING BEHAVLOR

BARADARI H.

Abstract: (40967 Views)

Ultrafine hydroxyapatite (HAp) powders with crystallite size in the range of 10-90 nm were synthesized by chemical precipitation process using Ca(OH)2 and H3PO4 solutions as starting materials. Molar ratio of Ca/P=1.68 was kept constant throughout the process and alkaline condition for the reaction was maintained using ammonium hydroxide. The role of raw material concentration on HAp crystallite size and morphology were investigated using X-ray diffraction (XRD) and scanning electron microscope (SEM) techniques. The results revealed that variations in crystallite size and morphology of synthesized HAp are strongly affected by the concentration of acid solution. To study the sintering behavior of HAp particles, the powders were pressed at 200 MPa using a uniaxial press. Sintering experiments were carried out at temperatures of 1100, 1250 and 1300°C with various soaking times at maximum temperatures. XRD was also used in determining thephases present after sintering process. The results indicated the decomposition of HAp into a-tricalcium phosphate (TCP) and b-TCP phases at 1300°C. The microstructure of the sintered HAp ceramics was characterized by SEM.

Keywords: HYDROXYAPATITE, CHEMICAL PRECIPITATION, NANOCRYSTALLITES, MORPHOLOGY, SINTERING, MICROSTRUCTURE

Type of Study: Research Paper | Subject: Ceramics

Rights and permissions
	This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.